Prince Tournament 6800 Review

Prince Tournament 6800 is an indoor table tennis table from AMP. The table makes the level of the game into the next higher level. The top surface of the table is made of MDF – Medium Density Fiberboard, which is more than a plywood. MDF is the combination of breaking down hardwood, wood fiber, wax, and a resin binder.

The surface can resist temperature and pressure and provides an effective bounce rate during the game. The table has come with a sufficient storage module for game accessories.

The setup is very easy as the table comes with 50% assembled. The whole setup process would take approx one hour to complete.

Key Features:

  • Big game and tournament table.
  • Indore Table Tennis.
  • Easy assembled.
  • MDF top surface of 18 mm.
  • Provides Optimal bounce.
  • 3″ wheel.
  • Swivel wheels with locks.
  • Steel box apron.

Stability and Protection:

  • The table has locking casters in its swivel wheels that it could be moved safely.
  • The additional accessories storage provides to store 6 balls and 2 rackets in each side.
  • The table comes with 50% pre-assembled.

Dimensions:

  • Table – 108″Length × 60″width × 30″ Hight
  • Storage – 32″Length × 60″ Width × 62″ Hight
  • Table when playback – 70″Length × 60″ width × 62″ Hight.
  • Table when packed – 63″ Length × 58″ Width × 6″ Hight.

Assembling The Prince Tournament 6800 Indore Table:

Now you have 50% assembled Prince Tournament 6800 Indoor Table Tennis Table. The pack comes with all the required instruments to assemble it completely.

Here we are providing the 10  steps, you can follow to complete the assembling process.

Step 1: Assemble of Caster Beam

You will need the following parts –

  • HAI Triangle Support Plates – 4
  • PE Caster Beams – 2
  • HE Bolts – 8
  • H13 Washers – 16
  • H17 Stop Spools – 8
  • H6 Lock Nuts – 8

Connect the Triangle Support plates in the ages of Caster Beams near the wheels, by using Nuts, Bolts, and washers.

Step 2: Attaching The Middle Plate

You will need the following parts –

  • H4 Bolts – 4
  • HU Lock Nuts – 4
  • H14 Washers – 8
  • Caster Beams
  • Middle plates

You will simply have to attach the middle plate with caster Beams by nuts, bolts, and washers. You will find the attaching holes in the middle palate and in the Casters Beams.

Step 3: Connecting the Support and Strut Tubes

You will need the following parts –

  • H1 Bolts – 4
  • H6 Lock Nuts – 4
  • H9 Plastic Spacers – 4
  • H10 Plastic Washers – 8
  • H13 Washers – 8.

First, attach the support and black strut tubes with every side of the caster beams.  Both the tubes would be attached in one hole with a single nut and bolt under triangle support nut.

Step 4 and 5: Stand all four black strut tubes. Make sure the wheel lock is on.

For the next step, you need to attach the surface table on the black start tubes.

Step 6: Support Tube Attachment

You will need

  • H3 Bolts – 4
  • HU Lock Nuts – 4
  • H11 Plastic Washers – 8
  • H14 Washers
  • Support – Tubes – 4

Now attach the table with support tubes with nuts and bolts. You will get the attaching holes in the legs of the table.

Step: 7 Secure black strut tubes with the table. You will have to attach the black tube with the table.

You will need –

  • H16 Screw – 4
  • P5 Black Strut Tubes – 2

Step8: Connecting Hinges

You will find Hinges on the table to attach them with the black strut tubes.

You will need –

  • H5 Bolts – 4
  • HI Lock Nuts – 4
  • H12 Plastic Spacers – 4
  • H15 Washers – 8
  • P5 Black Strut Tubes

Step 9: Accessory Holder Assembly

You will need –

  • P6 Accessory Holder – 1
  • H19 Bolts – 2

Step 10: Attaching the Bumpers pins

You will need –

  • P9 corner Bumpers – 4
  • P10 Bumpers – 4

After following these steps you will find your Prince Tournament 6800 Table Tennis Table assembled. We recommended going with youtube videos for the assembling process.

More:

Jenny
 

Click Here to Leave a Comment Below 0 comments